CS-Junkies Forums
Left4Dead2 Visuals Multihack - Printable Version

+- CS-Junkies Forums (https://cs-junkies.com/forums)
+-- Forum: CS-Junkies (https://cs-junkies.com/forums/Forum-CS-Junkies)
+--- Forum: Visuals Reborn Threads (https://cs-junkies.com/forums/Forum-Visuals-Reborn-Threads)
+--- Thread: Left4Dead2 Visuals Multihack (/Thread-Left4Dead2-Visuals-Multihack)



RE: Left4Dead2 Visuals Multihack - redogg - 04-17-2023

(04-16-2023, 06:42 PM)Lorian wrote
(04-16-2023, 03:08 PM)zhiendxanarx112 wrote Agreguen la opcion del Celling script para el hunter

Tambien un segundo lag xploit para tener 2

Anti aimbot se puede agregar ? Cuando eres infectado y mantienes el lag xploit activo, el aimbot de tus enemigos se vuelve inutil y no detecta a donde disparar

Porfavor agregar un opcion de aimbot para las rocas del tank y tambien para zombies comunes con silent aimbot preciso
1. you can create bind with these commands:
   bind "key" "cl_pitchup 77" *this will help you to raise heights easily*
   bind "key" "cl_pitchdown 12" *this is for ceiling, you can change it to slightly lower decimal values if you want*
2. ...
3. there is no such thing as "anti-aimbot", what you saw is an aimbot error due to prediction by speedhackers or fakelaggers... I know ways to slow down the aimbot tracking but the truth is that they are very annoying/uncomfortable to use
4. ...

edit: you can create an autoexec where you only have binds for ceiling, although I would never do it but it's a way...

example:
bind "1" "cl_pitchdown 11.79"
bind "2" "cl_pitchdown 89" *default command*

you may be banned on some servers if you modify either of these two commands, so I would only recommend doing this for official servers

ehh.. you will not get banned if you put bypass mouse option or whatever it called
unlock mouse option


RE: Left4Dead2 Visuals Multihack - Lorian - 04-18-2023

(04-17-2023, 09:19 PM)redogg wrote
(04-16-2023, 06:42 PM)Lorian wrote 1. you can create bind with these commands:
   bind "key" "cl_pitchup 77" *this will help you to raise heights easily*
   bind "key" "cl_pitchdown 12" *this is for ceiling, you can change it to slightly lower decimal values if you want*
2. ...
3. there is no such thing as "anti-aimbot", what you saw is an aimbot error due to prediction by speedhackers or fakelaggers... I know ways to slow down the aimbot tracking but the truth is that they are very annoying/uncomfortable to use
4. ...

edit: you can create an autoexec where you only have binds for ceiling, although I would never do it but it's a way...

example:
bind "1" "cl_pitchdown 11.79"
bind "2" "cl_pitchdown 89" *default command*

you may be banned on some servers if you modify either of these two commands, so I would only recommend doing this for official servers

ehh.. you will not get banned if you put bypass mouse option or whatever it called
unlock mouse option
I forgot about that option XD


RE: Left4Dead2 Visuals Multihack - ZetaKiloRZ - 04-18-2023

(04-18-2023, 01:16 AM)Lorian wrote
(04-17-2023, 09:19 PM)redogg wrote ehh.. you will not get banned if you put bypass mouse option or whatever it called
unlock mouse option
I forgot about that option XD
I enjoyed flipping my screen upside down and playing like that, made clips absolutely hilarious


RE: Left4Dead2 Visuals Multihack - userbluedo - 04-19-2023

can you add to the scoreboard like the amount of kills someone has to special infected?


RE: Left4Dead2 Visuals Multihack - redogg - 04-19-2023

(04-19-2023, 03:57 AM)userbluedo wrote can you add to the scoreboard like the amount of kills someone has to special infected?
its a bit of a problem currently. i need to fix event listeners to be able to get this information


RE: Left4Dead2 Visuals Multihack - sanek78 - 04-21-2023

The disable FastDL feature is very useful in my opinion, with it I load faster on servers. I noticed that I can move for half a second while others are standing.


RE: Left4Dead2 Visuals Multihack - redogg - 04-21-2023

(04-21-2023, 08:24 AM)sanek78 wrote The disable FastDL feature is very useful in my opinion, with it I load faster on servers. I noticed that I can move for half a second while others are standing.
Thanks bro but someone reported me that in the newest version fastdl is broken completely. It doesn't really download files without disable fastdl option. I'm checking that right now and I'll post Hotfix today to address some issues

And what you mean can move before others?


RE: Left4Dead2 Visuals Multihack - sanek78 - 04-21-2023

I tested it a long time ago, namely when this feature first appeared in your cheat, I mean when the round ends and change the map, I boot up faster, and can move while others are standing, I sort of spawn where I want. At the expense of being able to move that half a second or a second.


RE: Left4Dead2 Visuals Multihack - ZetaKiloRZ - 04-21-2023

New update seems to have Anti-OBS Player ESP not working properly, the update I always used previously was  Apr. 1st upload as I dont really download hotfixes. Before I downloaded this one, the menu never even showed up at all in stuff like Clips, now it does as well


RE: Left4Dead2 Visuals Multihack - redogg - 04-21-2023

(04-21-2023, 07:10 PM)ZetaKiloRZ wrote New update seems to have Anti-OBS Player ESP not working properly, the update I always used previously was  Apr. 1st upload as I dont really download hotfixes. Before I downloaded this one, the menu never even showed up at all in stuff like Clips, now it does as well
someone else told me the same, seems like you didnt set your recording software correcrly, i tested it and it worked very good for me. i tested it yesturday i think
[Image: PSvWPkU.png]


RE: Left4Dead2 Visuals Multihack - zhiendxanarx112 - 04-21-2023

Amigo porfavor arreglen el lag xploit, pruebenlo usandolo en valor 20 y veran a lo que me refiero, hace conflicto y es como si fuera que tengas speed hack y lag


RE: Left4Dead2 Visuals Multihack - ZetaKiloRZ - 04-21-2023

(04-21-2023, 08:48 PM)redogg wrote
(04-21-2023, 07:10 PM)ZetaKiloRZ wrote New update seems to have Anti-OBS Player ESP not working properly, the update I always used previously was  Apr. 1st upload as I dont really download hotfixes. Before I downloaded this one, the menu never even showed up at all in stuff like Clips, now it does as well
someone else told me the same, seems like you didnt set your recording software correcrly, i tested it and it worked very good for me. i tested it yesturday i think
[Image: PSvWPkU.png]
Strange, I never changed anything at all regarding settings or capture mode etc. Even on Medal (clipping software) when I looked back at some of the funny moments I clipped it wouldn't show but now it does.


RE: Left4Dead2 Visuals Multihack - redogg - 04-22-2023

(04-21-2023, 10:23 PM)ZetaKiloRZ wrote
(04-21-2023, 08:48 PM)redogg wrote someone else told me the same, seems like you didnt set your recording software correcrly, i tested it and it worked very good for me. i tested it yesturday i think
[Image: PSvWPkU.png]
Strange, I never changed anything at all regarding settings or capture mode etc. Even on Medal (clipping software) when I looked back at some of the funny moments I clipped it wouldn't show but now it does.
what fixed for me the issue was putting the source in software to game capture and not something else(theres like 3 or 4 other mods)
i can make it anti obs without the need of the selection of game capture but then ill have to stop updating nonsteam version, im pretty sure that version is in use

try to do what i said, put same settings as you see in screenshot

edit: i dont think it matters but i used this version because im on win 8.1 and newest version dont work for me almost at all
https://github.com/obsproject/obs-studio/releases/tag/26.1.0-rc2


RE: Left4Dead2 Visuals Multihack - redogg - 04-22-2023

(04-21-2023, 10:20 PM)zhiendxanarx112 wrote Amigo porfavor arreglen el lag xploit, pruebenlo usandolo en valor 20 y veran a lo que me refiero, hace conflicto y es como si fuera que tengas speed hack y lag
sorry bro it should be like that, that exploit acts like speedhack on low values


RE: Left4Dead2 Visuals Multihack - zhiendxanarx112 - 04-22-2023

Hermano cuando usas valor 20 en polonium no se vuelve loco, deberia trabajar mas el lag xploit y mejorarlo para que sea perfecto


RE: Left4Dead2 Visuals Multihack - redogg - 04-22-2023

(04-22-2023, 12:31 AM)zhiendxanarx112 wrote Hermano cuando usas valor 20 en polonium no se vuelve loco, deberia trabajar mas el lag xploit y mejorarlo para que sea perfecto
maybe value 20 isnt really 20 in pol? theres noting to optimize, thats how it works

edit: even on garrysmod i was speedhacking on low values in singleplayer (multiplayer not working)


RE: Left4Dead2 Visuals Multihack - zhiendxanarx112 - 04-22-2023

Cuando uso el valor en 1073 se queda quieto mi personaje eso es normal?


RE: Left4Dead2 Visuals Multihack - redogg - 04-22-2023

(04-22-2023, 01:06 AM)zhiendxanarx112 wrote Cuando uso el valor en 1073 se queda quieto mi personaje eso es normal?
yes, in high values it makes you unable to move


RE: Left4Dead2 Visuals Multihack - ZetaKiloRZ - 04-22-2023

(04-22-2023, 12:00 AM)redogg wrote
(04-21-2023, 10:23 PM)ZetaKiloRZ wrote Strange, I never changed anything at all regarding settings or capture mode etc. Even on Medal (clipping software) when I looked back at some of the funny moments I clipped it wouldn't show but now it does.
what fixed for me the issue was putting the source in software to game capture and not something else(theres like 3 or 4 other mods)
i can make it anti obs without the need of the selection of game capture but then ill have to stop updating nonsteam version, im pretty sure that version is in use

try to do what i said, put same settings as you see in screenshot

edit: i dont think it matters but i used this version because im on win 8.1 and newest version dont work for me almost at all
https://github.com/obsproject/obs-studio/releases/tag/26.1.0-rc2
Interesting, I made sure everything was the same and it was before and after reply, the anti obs seems to be functioning as intended now with 0 changes to settings in game and out. Maybe its a rare occurence?


RE: Left4Dead2 Visuals Multihack - Lorian - 04-22-2023

(04-21-2023, 10:20 PM)zhiendxanarx112 wrote Amigo porfavor arreglen el lag xploit, pruebenlo usandolo en valor 20 y veran a lo que me refiero, hace conflicto y es como si fuera que tengas speed hack y lag
it's normal...


RE: Left4Dead2 Visuals Multihack - Lorian - 04-22-2023

(04-22-2023, 01:06 AM)zhiendxanarx112 wrote Cuando uso el valor en 1073 se queda quieto mi personaje eso es normal?
yes... starting at values like 800 it starts to happen although it lasts a few seconds depending on your ping


RE: Left4Dead2 Visuals Multihack - redogg - 04-22-2023

(04-22-2023, 03:04 AM)ZetaKiloRZ wrote
(04-22-2023, 12:00 AM)redogg wrote what fixed for me the issue was putting the source in software to game capture and not something else(theres like 3 or 4 other mods)
i can make it anti obs without the need of the selection of game capture but then ill have to stop updating nonsteam version, im pretty sure that version is in use

try to do what i said, put same settings as you see in screenshot

edit: i dont think it matters but i used this version because im on win 8.1 and newest version dont work for me almost at all
https://github.com/obsproject/obs-studio/releases/tag/26.1.0-rc2
Interesting, I made sure everything was the same and it was before and after reply, the anti obs seems to be functioning as intended now with 0 changes to settings in game and out. Maybe its a rare occurence?

:thinkingface:

Edit: didn't realize it but I changed some faulty directx settings that might cause such issue. I'm posting hotfix1.2 tomorrow with these changes


RE: Left4Dead2 Visuals Multihack - sanek78 - 04-23-2023

Regarding the words WoCsJu, I think it may be useful, the fact is that the aimbot works (if it is not automatic) only when you make a shot. And he wants to aimbot immediately aimed (most likely in silent mode so it was convenient to play and others did not suspect) and he had only to press the shot button. This is probably to have fewer misses. Because sometimes you shoot and aimbot does not hit or does not have time to aim.
And we are talking about a non-automatic weapon such as a sniper rifle, shotgun or pistol.


RE: Left4Dead2 Visuals Multihack - redogg - 04-23-2023

(04-23-2023, 07:26 AM)sanek78 wrote Regarding the words WoCsJu, I think it may be useful, the fact is that the aimbot works (if it is not automatic) only when you make a shot. And he wants to aimbot immediately aimed (most likely in silent mode so it was convenient to play and others did not suspect) and he had only to press the shot button. This is probably to have fewer misses. Because sometimes you shoot and aimbot does not hit or does not have time to aim.
And we are talking about a non-automatic weapon such as a sniper rifle, shotgun or pistol.

Humm, its not related for how long you aim at target before shooting. The missing bullets are caused because im missing bullets fix. I will add that bullet fix soon, far as I understand only l4d2 has such issue


RE: Left4Dead2 Visuals Multihack - Steven - 04-24-2023

crash when injecting
L4D2V Reborn V0204HF1 (hf1.2)
https://drive.google.com/file/d/1nWcAbJMHRZx9ewmeauou1oY9tlDJyrfP/view?usp=share_link